Canon VB-M640V, Руководство по эксплуатации

Страница: 105 / 287

S
ett
ing Page
4
105
External Device Input 1, 2
Set the operation to be performed when an event is triggered by input from an external device.
The camera has two external device inputs. You can set the input for each of them.
You can set these if you have selected [Enable] in [External Device Input Event].
Note
An icon in the Admin Viewer Event Display panel will indicate when there is an external device input event (P. 184).
[Operation Mode]
Select the circuit condition to suit the signal input from the connected external device.
When [Normally Open] is set, an active event occurs when the terminals of the external device close, and an inactive event
occurs when the terminals open.
When [Normally Close] is set, an active event occurs when the terminals of the external device open, and an inactive event
occurs when the terminals close.
[Active Event Operation]
Select the operation to be performed when an active event is triggered.
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when an
active event is triggered.
[Inactive Event Operation]
Select the operation to be performed when an inactive event is triggered.
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when an
inactive event is completed.
[Ongoing Active Event Operation]
Select the operation to be performed during an active event. This can only be set when [Active Event Operation] is set to
[Enable].
If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the active
event.
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when an external device input event
is triggered.
It is necessary to set presets beforehand with [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] (P. 170).
Important
When the user has camera control privileges, those camera control privileges are released if the camera is moved to a preset position
specified in the [Preset] settings.
R11