Canon VB-H47 Скачать руководство пользователя страница 36

Страница: 36 / 195

Using Pan/Tilt/Zoom

Set the camera angle by panning, tilting and zooming the camera.

Note

• Camera operations using clicking and dragging, do not offer a high precision control of the camera.

• The administrator can operate the camera regardless of view restrictions. Authorized or guest users can only operate the camera within

the view restriction.



Clicking on the Video Display Area or Using the Sliders

Moving by Clicking on the Video Display Area

If clicking in the video display area, the camera angle will move so that the clicked mouse pointer location will

become the center. If the camera angle does not center on the desired location with a single click, repeat the

operation.

Note

• Click operations are not available in the video display area while using the Viewer PTZ or Digital PTZ.

• Click operations in the video display area become available after starting the Viewer PTZ or Digital PTZ.

Moving Using the

liders

Drag the pan and tilt sliders to pan and tilt the camera.

Drag the zoom slider to zoom the camera.

The slider can also move by clicking directly on the slider bar.

Note

• Slider operations cannot be performed unless the Viewer PTZ or Digital PTZ is started.

liders Used for Digital Zoom and Enhanced Digital Zoom

If [Video] > [Picture (Option)] > [Camera Control] > [Digital Zoom] is set to [Enable] on the Settings page (P. 75), the

digital zoom range (orange) will be displayed on the zoom slider and digital zoom operation becomes available.

Also, if [Video] > [Picture (Option)] > [Camera Control] > [Enhanced Digital Zoom] is set to [Enable] on the Settings

page (P. 75), the enhanced digital zoom range (blue) is displayed on the zoom slider and enhanced digital zoom

operation becomes available.

Important

• The camera is designed to last for a total of 50,000 pan/tilt reciprocating operations.

For example, the camera will last for approximately six years if it performs 25 reciprocating operations per day.
If the durability limit for pan/tilt operations is exceeded, the camera may not be able to perform focus and zoom operations correctly.

S32VE S32D

HM4x

S32VE S32D

HM4x

S32VE S32D

S820D/S920F

Zoom

lider

Drag upward to zoom in (telephoto), drag
downward to zoom out (wide-angle).

Tilt

lider

Move the camera vertically.

Pan

lider

Move the camera horizontally.

S820D/S920F

HM4x

S32VE S32D

Содержание VB-H47




































































































































































































Результаты поиска

Содержание VB-H47

Отзывы:

Похожие инструкции для VB-H47

Бренды по названию

Популярные бренды

Canon VB-H47, Руководство по эксплуатации

Результаты поиска

Содержание VB-H47

Отзывы:

Похожие инструкции для VB-H47

Бренды по названию

Популярные бренды