Canon VB-H47, Руководство по эксплуатации

Страница: 141 / 195

141
Able to change the administrator account, add new authorized users, and set the privileges for authorized users and guest
users.
Administrator Account
Set this when changing the account information for the administrator.
[Administrator Name]
Enter the administrator name using only alphanumeric characters, hyphens (-), and underscores (_). However, hyphens (-),
and underscores (_) cannot be used at the beginning.
[Password]
Enter the administrator password.
If the Camera Viewer, etc., are connected, terminate the connection before changing the password.
[Confirm Password]
Enter the same password as above for confirmation.
Authorized User Account
Add authorized users.
[User Name], [Password], [Confirm Password]
To add the authorized user, enter the user name and password, then click [Add].
Enter the user name using only alphanumeric characters, hyphens (-), and underscores (_).
Up to 50 authorized users can be added.
[User List]
Displays a list of added authorized users.
The order of the list can be changed with the
▲▼
buttons on the right.
To delete an authorized user from the list, select the user and click [Delete].
[Security] > [User Management]
Important
• To ensure system security, set the administrator password that should not be easily guessed by third parties. Do not forget the new
password after setting.
• If the administrator or the administrator password is forgotten, restore the factory default settings (P. 181). Note, however, that this will
reset all camera settings to factory default settings including the administrator account, the network information, date and time.