Canon VB-C500D, Руководство по эксплуатации

Страница: 30 / 160

1-16
Setting the Camera Control and External Device Name (Camera)
Camera Control
[Digital Zoom]
Select [ Enable ] or [ Disable ] for digital zoom.
* The higher the digital zoom ratio, the lower the image quality becomes.
Day/Night
(1) [Mode]
Select [ Manual ] or [ Auto ] as the Day/Night mode.
If [
Manual
] is selected, you can manually switch [
Day Mode
] and [
Night Mode
] using the
Admin Viewer Night Mode function ( P. 3-28).
If [ Auto ] is selected, set [ Switching Brightness ] and [ Response (sec.) ] according to the
environment in which the camera is installed as well as the desired switching condition.
(2) [Switching Brightness]
Set the brightness at which the Day mode and Night mode will be switched. Select [ Darker ],
[ Slightly Darker ], [ Standard ], [ Slightly Brighter ] or [ Brighter ]. Select [ Darker ] to capture video
in color whenever possible.
Select [ Brighter ] to reduce noise. Note that this will cause the camera to switch to black &
white earlier.
(3) [Response (sec.)]
Set the time in seconds needed to make judgment on day/night mode switching. Select [ 5 ],
[ 10 ], [ 20 ], [ 30 ] or [ 60 ].
If the brightness remains above or below the level set in (2) for the number of seconds set
above, the day mode and night mode will switch.
Select [ 30 ] or [ 60 ] if the brightness changes frequently due to passing of a light source in
front of the camera, etc. Select [ 5 ] or [ 10 ] if the brightness does not change much.
COP
Y