manualshive.com logo in svg

Canon VarioPrint MICR i Series, Руководство по эксплуатации

Поделиться
Скачать
Canon VarioPrint MICR i Series Скачать руководство пользователя страница 544

Filling levels of supplies and waste

The 

dashboard

 of the control panel shows messages and symbols to indicate when you need to

replace supplies and empty waste. The 

[Supplies] pane

 shows the status of all supplies and

waste.

When one of the supplies is completely used up the printer cannot continue and an action
required window pops up. Instructions help you perform the replacement procedure.

IMPORTANT

This guide provides instructions how to replace containers, replace ribbon cassettes, and refill

liquids. Carefully read the instructions before you start any of these procedures.

Dashboard information and alerts

[575] Dashboard symbols

[576] MICR symbol

Sym‐
bol

Action required

Sym‐
bol

Action required

General

 

One or more maintenance tasks are
necessary in short term.

Perform one or more maintenance tasks.

One of the CMYK ink containers is empty.
Printing can continue until the buffer is emp-
ty.

 

MICR ink container is empty. Printing can
continue until the buffer is empty.

 

One of the CMYK ink containers is not availa-
ble. Printing can continue until the buffer is
empty.

 

MICR ink container is not available. Printing
can continue until the buffer is empty.

 

One of the waste containers is not available.
The printer can continue. Place the missing
waste container.

 

One of the CMYK ink containers is not loca-
ted in the correct location. Printing can con-
tinue until the buffer is empty.

 

4

Filling levels of supplies and waste

544

Chapter 15 - References

VarioPrint i-series MICR

Содержание VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды