manualshive.com logo in svg

Canon VarioPrint MICR i Series, Руководство по эксплуатации

Поделиться
Скачать
Canon VarioPrint MICR i Series Скачать руководство пользователя страница 409

Digital print certification

The available pre-defined, industry standard color validation tests meet one or the following
digital print certifications.
1. DPC: IDEAlliance Digital Press Certification
2. VPC: FOGRA Validation Printing System Certification
3. PSD: FOGRA Print Standard Digital Certification

Evaluation methods

The traditional 

side-by-side

 evaluation method checks if printed colors exactly match the colors of

the reference printing condition. The 

media relative

 evaluation takes into account that the paper

white values of the printed media and the reference media can be different. Therefore, the media
relative method uses a non-linear algorithm to compensate for the different white points. The

SCCA

 (Substrate-Corrected Colorimetric Aims) evaluation method, used by IDEAlliance tests, is

also based on the media relative evaluation.

Target charts

The color validation test prints target charts for the selected media/media print mode
combination. You measure the target charts when they are dry. The type of target chart belongs
to the definition of the color validation test or the profile accuracy test. The charts must be printed
on the media that you are evaluating.

For custom color validation tests you can select one of the following charts.
1. PRISMAsync Media Wedge
2. IDEAlliance Control Wedge 2011
3. IDEAlliance Control Wedge 2013

[494] PRISMAsync Media Wedge

Patches of the target chart

The patches of the target charts represent primary colors, secondary colors, grays, and other
color mixes. The following patch names are part of the metrics that are part of the tests.

Learn about color validation tests

Chapter 12 - Print what you expect

409

VarioPrint i-series MICR

Содержание VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды