manualshive.com logo in svg

Canon VarioPrint MICR i Series, Руководство по эксплуатации

Поделиться
Скачать
Canon VarioPrint MICR i Series Скачать руководство пользователя страница 298

Define color defaults

Go to the color defaults

Open the Settings Editor and go to: [Color]

→

[Color defaults].

[367] [Color defaults] tab

Define the color defaults

[368] Color defaults

1. Use the 

[Print black & white]

 option to indicate how jobs are printed: in black and white or in

color.

2. Use the 

[Image smoothing]

 option to prevent unsmooth lines and image blocks in the

document. This occurs when source objects have a lower resolution than the printer. The
[Image smoothing] interpolation method only affects images below 300 dpi.

3. Use the 

[Moiré reduction for images]

 option to apply a Moiré reduction algorithm to enhance

photographic images. Please note that when images have a resolution below 300 dpi, the
Moiré reduction only takes effect when the [Image smoothing] option is enabled.

4. Use the 

[PDF overprint simulation]

 option to make opaque objects look transparent.

Underlying objects become visible. If this option is disabled, the colors on top will knock out
all underlying colors.

5. Use the 

[Preserve pure black]

 option to apply pure black preservation when possible. Pure

black preservation means that the color black is composed of 100% K ink. When pure black
preservation is not possible or disabled, the color black is composed of a mixture of two or
more C, M, Y, and K inks.

Define color defaults

298

Chapter 11 - Manage color definitions

VarioPrint i-series MICR

Содержание VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды