Canon varioPRINT 6000 TITAN Series страница 64 Скачать руководство пользователя

Страница: 64 / 69

Canon

varioPRINT 6000 TITAN Series Customer Expectations Document

Revision 4

varioPRINT 6000 TITAN Series Customer Expectations Document

Page 63

14. Media Usage/Compatibility

The varioPRINT 6000 TITAN Series engines maintain reliable, predictable, and

high-quality output. Consistency of the output is dependent on knowing and

compensating for the variables of a print job. The varioPRINT 6000 TITAN Series

engines incorporate many control systems which compensate for environmental

and print process conditions. Another variable is the print media. Knowing the

characteristics of the media facilitates optimal print output.

14.1 Media Characteristics by Media Library Parameters

This section describes the standard media library characteristics and parameters.

The following settings can be manually adjusted through the Settings Editor >

Media > Add icon. The Settings Editor can only be accessed via a Web browser

using the IP address of the varioPRINT 6000 TITAN Series. Media can also be

added at the UI on the operator panel.

The IP address of the varioPRINT 6000 TITAN Series is found on the machine’s

operator panel through System > Local key operator settings > Connectivity >

TCP/IP address.

The table below describes the Add new media settings and each setting’s

description.

Setting

Description

Name

Set the name of the media.

Size

Select the size of the paper from the drop-down list, including

custom size paper.

Width (0.01 inches)

Specify the width of the custom paper in millimeters or inches.

Length (0.01 inches)

Specify the length of the custom paper in millimeters or inches.

Weight

Specify the weight of the paper in g/m

or lb.

Standard Type

Select the standard type from a pre-defined list/

Custom type name

Select the custom type name from a pre-defined list.

Tab

Select the check box to use tab paper, and then enter the cycle

length (how many tabs in one set).

Insert

Select the check box to use the paper as a sheet insertion, and

then enter the cycle length (how many sheet insertions in a set).

Oriented

Specify letterhead or pre-punched paper.

Cycle length

Set the value 1 to N, where “N” is the number of sheets in one

cycle. Must specify the cycle length when specifying tab sheets

or sheet insertions.

Punch holes

Specify how many holes are in the pre-punched paper.

Standard color

Specify the color of the paper. This setting acts as an identifier to

display the color of the paper on the operator panel.

Representation color

Specify the RGB color value (0-255) for identification purposes

on the operator panel.

Coated

Specify the type of paper (e.g., Vellum, Coated, Textured).

Содержание varioPRINT 6000 TITAN Series






































































Результаты поиска

Содержание varioPRINT 6000 TITAN Series

Отзывы:

Похожие инструкции для varioPRINT 6000 TITAN Series

Бренды по названию

Популярные бренды

Canon varioPRINT 6000 TITAN Series, Руководство пользователя

Результаты поиска

Содержание varioPRINT 6000 TITAN Series

Отзывы:

Похожие инструкции для varioPRINT 6000 TITAN Series

Бренды по названию

Популярные бренды