Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series
Service Guide
April 2021
Revision 1
Page 35
B.
Transportation
It is recommended to utilize a shipping/trucking company that is experienced
at transporting sensitive electronic equipment, i.e. white glove service. An air
ride vehicle is preferred whenever possible. Great care must be taken not to tip
or bounce the equipment. Permanent damage to the equipment may occur if
these recommendations are not followed.
Refer to the varioPRINT 6000 Series Transportation & De-installation Manual
available on the
Table 29 – Package Dimensions and weight
Module
On Pallet (boxed for transportation)
Dimensions
Weight
Width
Depth
Height
Print Engine Module
63.0”
51.2”
58.7”
1,779 lb
Paper Input Module-B1 / FLEX-A1
45.3”
34.3”
54.4”
551 lb
Input Interface Module-B1
34.2”
45.2”
53.3”
245 lb
iHCS-2.1 Stacker/ Finisher Module-B2
53.9”
34.3”
83.4”
706 lb
iHCS-2.1 Stacker Module-B2 Only
53.9”
35.0”
53.1”
419 lb
Controller UI
47.2”
31.5”
25.6”
88 lb
Print Guard Module lll / IV (2x)
45.3”
32.2”
53.1”
437 lb
Media Enhancement Module
45.3”
32.2”
53.1”
348 lb