Canon UFR II, Руководство пользователя

Страница: 52 / 149

Changing the Port
This explains the procedure for changing the port used by a device connected to a network.
If you temporarily set a port of the device when installing the driver, change it to a correct port by following this
procedure.
Here, the method for creating a Raw or LPR port using "Standard TCP/IP Port" is explained.
Prerequisites
● Driver installation
● Confirm the name or IP address of the device (if adding a standard TCP/IP port).
To add a standard TCP/IP port, you need to enter the name or IP address of the device. For the name of the
device, use the name by which the device is known on the network. If you do not know the device name or IP
address, check with your network administrator.
● Determining to protocol to use
Raw: A protocol that can be used with Windows. It transmits data at a higher speed than LPR.
LPR: The protocol commonly used by TCP/IP.
● When starting the computer, logon as a member of Administrators.
Procedures
1
Display [Devices and Printers] from the [Control Panel] of Windows.
2
Right-click the icon of the device you are going to set → select [Printer properties].
If you are using a touch panel, press and hold the icon of the device you want to set → tap [Printer properties]
in the pop-up menu.
3
Display the [Ports] sheet → click [Add Port].
Changing Settings to Match the Usage Environment
48