Canon TX-F Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 78

background image

Safety Information

(3)

Installation Operation

WARNING

Do not connect the instrument with anything other than specified.
Otherwise, it may result in fire or electric shock.
Also, when other equipment is going to be connected to the instrument using
the connector for interface, be sure to check after connection that leakage cur-
rent is within the tolerable value.
For details, please contact Canon representative or distributor.

Power Supply

WARNING

Only operate the instrument with the type of power supply indicated on the rat-
ing label. Otherwise, it may result in fire or electric shock.

WARNING

Be sure to disconnect/connect the cables as indicated in this manual.
The unit weighs 21 kg, so bear in mind that it may tip over if proper care is not
taken.
Also, do not handle them with wet hands. Otherwise, you may get an electric
shock that may result in death or serious injury.

WARNING

Securely plug in the power cable into the AC outlet.
If contact failure occurs, or if dust or metal object comes in contact with the
exposed metal prong of the plug, fire or electric shock may result.

WARNING

Be sure to hold the plug or connector to disconnect the cable.
If you pull the cable, the core wire may be damaged, resulting in fire or electric
shock.

WARNING

Do not cut or process the cables. Also, do not place anything heavy, including
the instrument on it, step on it, pull it, bend it, or bundle it.
Otherwise, the cable may be damaged, which may result in fire or electric
shock.

WARNING

Do not get the power for more than one instrument from the same AC outlet.
Otherwise, if may result in fire or electric shock.

CAUTION

The instrument is shipped with a grounding type (three-core) power cable.
To reduce the risk of electric shock, always plug the cable into a grounded
power outlet.

CAUTION

To make it easy to disconnect the plug at any time, avoid putting any obstacles
near the outlet.

!

!

!

!

!

!

!

!

!

«
...
3
4
5
6
7
...
»

Содержание TX-F















































































Отзывы:

Нет отзывов

Похожие инструкции для TX-F

Бренд: ICT Страницы: 48

Бренд: OfiTE Страницы: 67

Бренд: Bacharach Страницы: 28

Бренд: dbx Страницы: 2

Бренд: OHAUS Страницы: 32

Бренд: E Instruments Страницы: 2

Бренд: RIDGID Страницы: 18

HYDROMETTE HB 30

Бренд: GANN Страницы: 65

Бренд: Chroma Страницы: 63

Ranger TDR VDV501-090

Бренд: Klein Tools Страницы: 44

Бренд: PRONIVO Страницы: 40

Бренд: socomec Страницы: 34

Бренд: Gates Страницы: 112

Бренд: Tohnichi Страницы: 12

Concert Performer Series Digital Piano CP110

Бренд: Kawai Страницы: 149

TEMS AUTOMATIC - 2

Бренд: ASCOM Страницы: 12

Бренд: Supertech agroline Страницы: 10

Бренд: Omega Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды