Canon TS7450i Series Скачать руководство пользователя страница 76

Страница: 76 / 455

Loading Plain Paper / Photo Paper in Rear Tray

You can load plain paper or photo paper.

You can also load envelopes on the rear tray.

Loading Envelopes in Rear Tray

Important

• If you cut plain paper to a size of 5" x 7" (13 x 18 cm) or smaller to perform a trial print, it may cause a

•

paper jam.

Note

• We recommend Canon genuine photo paper for printing photos.

•

For details on the Canon genuine paper, see

Supported Media Types

• You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour

•

Paper SAT213.

For the page size and paper weight you can use for this printer, see

Supported Media Types

Prepare paper.

Align the edges of paper. If paper is curled, flatten it.

Note

• Align the edges of paper neatly before loading. Loading paper without aligning the edges may

•

cause paper jams.

• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the

•

paper becomes completely flat.

For details on how to flatten curled paper, see

Check3

Paper Is Smudged / Printed Surface Is

Scratched

• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a

•

time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.

Open rear tray cover (A). Pull straight up and fold back paper support (B).

Содержание TS7450i Series








































































































































































































































































































































































































































































Результаты поиска

Содержание TS7450i Series

Отзывы:

Canon TS7450i Series, Онлайн-руководство, Страница: 76 / 455

Результаты поиска

Содержание TS7450i Series

Отзывы: