Canon TS7400 Series Скачать руководство пользователя страница 368

Страница: 368 / 454

Ink Does Not Come Out

Check1

Check the estimated ink levels in the FINE cartridges. When a FINE cartridge

runs out of ink, replace it with new ones.

Checking Ink Status on the LCD
Replacing a FINE Cartridge

Check2

Is the FINE cartridge installed properly?

• Check that there is no orange tape left on the FINE cartridge.

If the orange tape remains on the FINE cartridge, peel it off.

• If you do not close the ink cartridge locking cover correctly, ink may not be ejected correctly.

Open the scanning unit / cover to open the ink cartridge locking cover, and then close it.

Press down the ink cartridge locking cover until it clicks into place.

Check3

Are the print head nozzles clogged?

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.

Step1

Print the nozzle check pattern.

After printing the nozzle check pattern, examine the pattern.

•

For Windows:

Printing a Nozzle Check Pattern

•

For macOS:

Printing a Nozzle Check Pattern

If the pattern is not printed correctly, go to the next step.

Step2

Clean the print head.

368

Содержание TS7400 Series







































































































































































































































































































































































































































































Результаты поиска

Содержание TS7400 Series

Отзывы:

Похожие инструкции для TS7400 Series

Бренды по названию

Популярные бренды

Canon TS7400 Series, Онлайн-руководство

Результаты поиска

Содержание TS7400 Series

Отзывы:

Похожие инструкции для TS7400 Series

Бренды по названию

Популярные бренды