67
Proje
cti
ng
an
Im
age
Selecting an Image Mode
You can select an image mode depending on the projecting image.
In each image mode, you can further adjust the brightness, contrast, sharpness, gamma,
color adjustment, advanced adjustment, and lamp mode. (
)
■
Image modes
Standard
Select this to project an image with near-original quality and a high regard for reproduc-
tion of white. It is suited to project text-based computer screens or visual software (mov-
ing pictures) in a bright room.
Presentation
Select this to project an image with quality suited for the presentation. It is also suited to
project visual software (moving pictures) with a high regard for the brightness.
Movie
Select this to project common visual software (moving pictures). It is suited to easily enjoy
the atmosphere of a moving theater in a dim room.
sRGB
Select this if you want to project an image in the display mode conforming to the sRGB
standard (
). It is suited to project an image shot by sRGB-compatible digital camera.
Photo (SX80 II)
If you select [Photo] for [Image mode], make sure to set [Ambient light] in the [Image
adjustment] as well.
You can correct an image according to the ambient light based on [sRGB] in [Image
mode] and project the image with higher tone on the screen by setting [Ambient light]. It
is suited to project an ornamental photo, etc. under an ambient light.
It is available if the input signal is [ANALOG PC-1], [ANALOG PC-2], [DIGITAL PC], or [USB].
■
How to Select an Image Mode
Press the
IMAGE
button on the remote control to select your desired image mode.
The selection is toggled among aspect types by pressing the button.
You can also select any image mode from the [Image mode] menu. (
Remote control
(SX80 II)
