Canon Super G3 Fax Board-AF1, Руководство по обслуживанию

Страница: 51 / 74

Chapter 5
5-9
5.2.12 SSSW-SW30
5.2.12.1 Functional Construction
0025-3125
T-5-16
5.2.12.2 Detailed Discussions of Bit 5
0025-3126
Switching the detection method when executing the dial tone detection at the time of calling.
1: New detection method (Default)
0: Old detection method
5.2.12.3 Detailed Discussions of Bit 6
0025-3127
This bit is used for other function. (Non-disclosure function)
Bit Function 1 0
0 not used - -
1 not used - -
2 not used - -
3 not used - -
4 not used - -
5 Dial tone detection method switching New detection method Old detection method
6 Non-disclosure Fixed -
7 not used - -
Be sure to switch the following switches when switching the switch.
- In case setting the switch as 1 (new detection method):
/* DIAL TONE01 */ B11000001
/* DIAL TONE02 */ 350
/* DIAL TONE03 */ 10
/* DIAL TONE04 */ 1
/* DIAL TONE05 */ 100
/* DIAL TONE06 */ 0
/* DIAL TONE07 */ 12
/* DIAL TONE08 */ 7
/* DIAL TONE09 */ 3
- In case setting the switch as 0 (old detection method):
/* DIAL TONE01 */ B11000001
/* DIAL TONE02 */ 600
/* DIAL TONE03 */ 10
/* DIAL TONE04 */ 10
/* DIAL TONE05 */ 0
/* DIAL TONE06 */ 0
/* DIAL TONE07 */ 0
/* DIAL TONE08 */ 5
/* DIAL TONE09 */ 0
The setting is fixed as '1', and do not change it.