manualshive.com logo in svg

Canon SmartBase 1210D, Руководство по обслуживанию, Страница: 158 / 406

Поделиться
Скачать
Canon SmartBase 1210D Скачать руководство пользователя страница 158

CHAPTER 3 INSTALLATION

COPYRIGHT © 2002 CANON INC. 

2000 2000 2000 2000

 CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002

3-14

3 When Relocating the Machine

If the machine must be moved by truck or other means of transportation, be sure to go

through the following:

1. If the machine is equipped with fax function and the move will take 2 hours or more, the

fax image data, if any, will be lost. Advise the user on this and, if necessary, print out the
image data.

2. Be sure no communication is under way with an external device.
3. Check that the contact sensor is in home position and disconnect the power cord.
4. Disconnect the interface cable and modular cable.
5. Remove the delivery tray.
6. Slide the reader unit to the left, and open the cartridge cover.
7. Take out the shipping screw that have been stored away inside the machine.

F03-301-01

8. Take out the cartridge from inside of the machine and put it in a protective bag or the

like to avoid direct rays of the sun.

9. Close the cartridge cover and put back the reader unit.
10. Fit the shipping screw you removed in step 7 and secure the contact sensor in place.

F03-301-02

Содержание SmartBase 1210D























































































































































































































































































































































































































Отзывы:

Нет отзывов