21
This feature prints a select portion of an image.
The
trimming
feature
can
only
be
used
in
the
(Single)
mode.
1
Press the
TRIM.
button.
The image will display at full size on the LCD monitor.
2
Press the
DISP.
button.
The display will switch into a mode allowing you to set the print area
size and orientation.
3
Press the
and
buttons to adjust the size of the print
area.
Press the
and
buttons to rotate the frame 90 degrees.
4
Press the
DISP.
button.
The display will switch back into the mode for setting the frame
position.
5
Press the
,
,
and
buttons to shift the print area
as desired.
6
When you finish the adjustments, press the
TRIM.
button.
This concludes the trimming settings.
• To
cancel
the
trimming
setting,
press
the
button
until
the
area
frame
disappears
when
you
have
the
display
in
the
mode
for
setting
the
area
size
and
orientation.
• The
trimming
setting
is
reset
when
the
is
completed.
Trimming Settings (CP730 Only)