Canon SADDLE FINISHER K3 Скачать руководство пользователя

Страница: 2 / 469

Application

This material has been prepared by Canon Inc. for the purposes of making available the

technical information needed for the technical training of technicians responsible for

servicing the product, and to assist them in installation, maintenance and repair. This

material contains information that is pertinent to all regions where the product is to be

sold, and may contain information that is not applicable to individual regions.

Also, the information contained in this material may differ from 'actual machine

specifications', 'machine specifications published in advertising literature' and 'other

printed matter'. Queries regarding the specifications and content of this material should be

directed to the Service Department of the competent sales company.

Revisions

Because of on-going revisions and modifications to the product, some of the details

contained in this material may be inaccurate. For this reason, any revisions or changes in

the information are published as technical information, as and when necessary.

The following statements do not apply in countries or regions where they conflict with

local laws and regulations.

Trademarks

All product names and company names contained in this material are the trademarks or

registered trademarks of those companies.

The copyright of this material belongs to Canon Inc. This material may not be

duplicated or reprinted in part or in whole, or translated into other languages, without the

written permission of Canon Inc.

2000 2000 2000 2000

CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001

Warning

This manual is confidential and its content is to be handled with due care.

Failure to do so may result in prosecution.

Printed in U.S.A.

Imprimé au U.S.A.

Содержание SADDLE FINISHER K3
































































































































































































































































































































































































































Результаты поиска

Содержание SADDLE FINISHER K3

Отзывы:

Похожие инструкции для SADDLE FINISHER K3

Бренды по названию

Популярные бренды

Canon SADDLE FINISHER K3, Руководство по обслуживанию

Результаты поиска

Содержание SADDLE FINISHER K3

Отзывы:

Похожие инструкции для SADDLE FINISHER K3

Бренды по названию

Популярные бренды