Canon Saddle Finisher-AF2, Руководство по обслуживанию, Страница: 85 / 244

Chapter 3
3-27
3.5.6 Delivery Operation
0020-4771
1) The machine starts delivery of the stack at the end of alignment or stapling by rotating the delivery roller in the direction of the arrow.(At non-staple mode de-
livery, the control of stack delivery roller angle switching is performed.)
2) In the event of stapling on one side*, the assist stopper synchronises with the sheaf delivery roller and moves in the direction of the arrow. This starts the paper
eject action.
F-3-34
Stack delivery roller angle control
To enhance the productivity, the paper is delivered to the delivery tray without passing the process tray in case of lower delivery in non-staple mode.
In this case, since the angle when the paper is coming to the stack delivery roller is too steep compared to the delivery from the process tray, the paper feed operation
is not stable. Thus, the stack feed upper roller moves to the downstream to enlarge the angle when the paper is coming to the stack delivery roller to provide the
stable paper feed.
[1] Swing guide
[2] Stapled stack of sheets
[3] Stack delivery roller
[4] Assist stopper
[2]
[1]
[3]
[4]