Canon Saddle Finisher-AF2, Руководство по обслуживанию

Страница: 190 / 244

Chapter 5
5-28
5.3.2.18 Adjusting Assist Stopper Position
0021-1726
Execute this adjustment in the case of variation in the top sheet of the stapled
delivery stack.
Adjustment method is as follows:
1) Open the front cover.
2) Hold the lever [1] to pull out the saddle unit [2], and then open the saddle
right guide [3].
F-5-121
3) Set A4 or LTR size paper [1] on the intermediate process tray in the arrow
direction, and then measure displacement amount [A] between the paper
edge stopper [2] and the assist stopper [3].
If the measured value (+A or -A) is out of the specified value (0 +
0.5mm), go through the following steps to adjust the measured value to
be within the specified value.
F-5-122
4) Remove the 2 screws [2] to remove the assist stopper [1].
F-5-123
5) Loosen the screw [1] of the assist stopper to adjust the displacement
amount of the stopper [2] to be within the specified value [3].
[2]
[3]
[1]
+A
-A
[1]
[1] [2] [2] [3]
[1] [2] [2] [3]
[1] [2] [2]