Canon Saddle Finisher-AF2, Руководство по обслуживанию, Страница: 170 / 244

Chapter 5
5-8
F-5-27
5.3.2.3 Adjusting Position of Stapler
0021-1707
Execute this adjustment when replacing the staple unit in the intermediate
process tray assembly.
Adjusting method is as follows:
1) Put a marking [1] on the position of the staple unit installed before replac-
ing it.
2) Install the new staple unit [2] with the marking position [1] aligned, and
then secures the staple unit [2] with the 2 screws [3].
F-5-28
5.3.2.4 Speed Adjustment of Swing Guide
0021-1709
Execute this adjustment when replacing the swing guide motor or EEPROM
on the finisher controller PCB.
Adjusting method is as follows:
1) Turn ON the power of the finisher.
2) Turn ON the power of the host machine to be on to be on standby.
3) Open the front cover and put the door switch tool into the door switch [1].
F-5-29
4) Remove the screw [2] to remove the switch cover [1].
[3]
[2]
[2]
[C]
[1]
[1]
[1]
[2]
[3]
[1]
[1]