Canon Saddle Finisher-AF2, Руководство по обслуживанию

Страница: 121 / 244

Chapter 4
4-11
4.3.2 Feed Motor
4.3.2.1 Preparation for Removing Buffer Front Feed
Motor
0020-8846
1) Remove the rear upper cover (right).
(page 4-3)
Reference[Removing
the Rear Upper Cover (Right)]
2) Remove the rear upper cover (left). (page 4-3) Reference[Removing the
Rear Upper Cover (Left)]
4.3.2.2 Removing the Buffer Front Feed Motor
0020-8847
1) Remove the buffer front feed motor unit [1].
- 1 connector [2]
- 2 screws [3]
F-4-42
2) Remove the buffer front feed motor [1].
- 2 screws [2]
F-4-43
4.3.2.3 Preparation Removing the Inlet feed Motor
0020-8854
Remove the rear cover. (page 4-2) Reference[Removing the Rear Cover]
4.3.2.4 Removing the Inlet Feed Motor
0020-8855
1) Remove the cable [1].
- 1 edge saddle [2]
- 2 wire saddles [3]
F-4-44
2) Remove the inlet feed motor [1].
- 1 connector [2]
- 2 screws [3]
F-4-45
3) Remove the inlet feed motor [1].
- 2 screws [2]
F-4-46
4.3.3 Paper Trailing Edge Drop Motor
4.3.3.1 Preparation for Removing the Paper Trailing Edge
Drop Motor
0021-6251
1) Remove the rear cover.
(page 4-2)
Reference[Removing the Rear Cover]
4.3.3.2 Removing the Paper Trailing Edge Drop Motor
0021-6252
1) Remove the paper trailing edge drop motor [1].
- 1 connector [2]
- 2 screws [3]
CAUTION:
Do not drop the belt [1] during removal.
[1]
[3]
[2]
[1]
[1]
[2]
[3] [1] [2] [3]
[1]
[3]
[2]
[3]
[1]
[2]