Canon Saddle Finisher-AF2, Руководство по обслуживанию, Страница: 120 / 244

Chapter 4
4-10
3) Lift the upper cover [1] as the direction of the arrow, and remove the in-
side cover (upper) [2].
- 4 screws [3]
F-4-37
4.2.9 Inside Cover (Lower)
4.2.9.1 Removing the Inside Cover (Lower)
0020-8354
1) Open the front cover.
2) Remove the inside cover (lower).
- 2 screws [2]
F-4-38
4.3 Drive System
4.3.1 Buffer Pass Motor
4.3.1.1 Preparation for Removing Buffer Motor
0020-8849
Remove the rear upper cover (right).
(page 4-3)
Reference[Removing the
Rear Upper Cover (Right)]
2) Remove the rear upper cover (left). (page 4-3) Reference[Removing the
Rear Upper Cover (Left)]
Remove the rear cover.
(page 4-2)
Reference[Removing the Rear Cover]
4.3.1.2 Removing the Buffer Motor
0020-8850
1) Remove the cable guide [1].
- 1 brake cable [2]
- 7 connectors [3]
- 2 screws [4]
F-4-39
2) Remove the buffer motor unit [1].
- 1 connector [2]
- 2 screws [3]
F-4-40
3) Remove the buffer motor [1].
- 2 screws [2]
F-4-41
[1]
[2]
[3]
[1]
[1]
[2]
[1] [1]
[1]
[1]
[1]
[2]
[3]
[3]
[1] [2] [2]