Canon REALiS WUX5000, Руководство пользователя и инструкция по установке

Страница: 169 / 240

169
Preparing the Remote Control
Installation Manual
Connecting to a Networ
k
■ Windows XP
1
From the PC [Start] menu, select [Control Panel].
2
Select [Network and Internet Connections] and open [Network Connections].
3
Right-click [Local Area Connection], and open [Properties].
4
Select [Internet Protocol (TCP/IP)] and click the [Properties] button. Make a note of
the original network settings (IP address, subnet mask, default gateway, etc).
5
Select [Use the following IP address] and set the IP address and subnet mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
Example
IP address:192.168.254.1
Subnet mask: 255.255.255.0
6
When the settings are completed, click the [OK] button and then click the [OK] button
on the [Local Area Connection Properties] window to close it.
Downloaded From projector-manual.com Canon Manuals