Canon R-F10, Руководство по эксплуатации, Страница: 37 / 70

– 25 –
6.1 Settings for Measurement (Page: 1/3)
6.1 Settings for Measurement (Page: 1/3)
6.1.1 Basic Operation
[How to Select the Item]
Turn the roller to select the item to be changed.
The selected item will be displayed in reverse image.
[How to Change the Setting]
Press either IOL switch, VD switch, START switch or PRINT switch.
The selected setting will be highlighted.
NOTE: Some settings must be changed in a different ways. The procedure for changing
those settings will be indicated under the explanation of each item.
6.1.2 Items
VD
Vertex distance “ 12.0 , 13.5 ”
Each time VD switch is pressed in measurement mode and DISPLAY
mode, vertex distance selected here and 0.0 mm will switch over on
the display, and the result will be converted accordingly.
CYL
Cylinder form “
–
,
+
,
+/-
”
– SET MODE – PAGE: 1/3
VD : 12.0 13.5
CYL : – + +/–
INC : 0.12 0.25
COUNT : ON OFF
[No.] : = 00001 RESET
DATE : 25/SEP/2001 14:50
ORDER : YMD MDY DMY
AUTO MEASURE : 1 3 5
R–L MEASURE : ON OFF
AUTO PRINT : ON OFF
↓
END
– – –
→
PAGE+
– – –
– – –
PAGE–
←
→
– – –
– – –
– – –