Canon R-F10, Руководство по эксплуатации, Страница: 35 / 70

– 23 –
5. Measurements Stored in Memory [DISPLAY Mode]
In DISPLAY mode, you can see the results (maximum of 10 data for each eye) of measure-
ments stored in memory.
Press
DISP switch in order to enter DISPLAY mode.
Press it again to go out.
[How to change the order of refraction]
Press
IOL
switch.
The order of data will change starting from larger number of SPH with + sign (i.e. from
stronger hyperopia) and ending with larger number with - sign (i.e. stronger myopia).
Press
IOL switch again in order to return to the original order.
[[How to change vertex distance]
Press VD switch.
[[How to print the data in the condition displayed]
Press
PRINT
switch.
[How to delete all data]
NOTE: When data are deleted from DISPLAY Mode, they will also be deleted from
the measurement mode.
Press
R/L
switch. Confirmation meassage will appear.
Press START switch to delete, or PRINT switch to cancel.
– DISPLAY MODE –
RIGHT PD: 67 LEFT VD: 13.5
No. 00001
SPH CYL AX SPH CYL AX
1 –0.37 –0.75 37 –0.62 0.00 180
2 –0.50 –0.75 36 –0.75 0.00 180
3 –0.50 –0.75 36 –0.75 0.00 180
4
5
6
7
8
9
10
[ –0.50 –0.75 36 ] [ –0.75 0.00 180 ]
END VD
– – –
– – –
PRINT
– – –
SORT CLEAR
– – –
– – – – – – – – –
– – –
Results of
refractometry
Standard value