manualshive.com logo in svg

Canon R-F10, Руководство по эксплуатации, Страница: 31 / 70

Поделиться
Скачать
Canon R-F10 Скачать руководство пользователя страница 31

– 19 –

4.3  Measurement in MANUAL Mode

4.3 Measurement in MANUAL Mode

Perform measurement in MANUAL mode when the pupil is eccentric, or when measuring a
certain examinee is apt to result in error.

NOTE: Be sure to perform focusing precisely in manual measurement. Otherwise, measure-

ment error may occur.

1

Choose manual measurement

Press 

MANU.

 switch to display the

word “

MANUAL

” on the monitor.

2

Display the examinee’s right eye on the monitor

Use the roller and the trackball so that
the right eye of the examinee is seen
approximately in the center of the
monitor.

Measurement head moves back and
forth when the roller is turned.
It moves up and down when trackball
is turned back and forth, and to right
and left when trackball is turned to
right and left.

3

Have the examinee look at the eye fixation target

Have the examinee look at the red roof in the center of the scene shown.

PD: – –

 VD:13.5

No. 00001

MANUAL

RIGHT

SPH

CYL

AX

   1:

PD: – –

 VD:13.5

No. 00001

MANUAL

RIGHT

SPH

CYL

AX

   1:

Содержание R-F10







































































Отзывы:

Нет отзывов