Canon PS-7000, Руководство по обслуживанию

Страница: 32 / 67

Chapter 3 Troubleshooting
3-9
2. LED Indication
2.1. LED Indication
Status LED
Conditions
Power
LED
HDD
LED
Receiving Processing Printing
Normal
During initialization following power-on
1)The Power LED turns red immediately after power-on.
2)All the LEDs turn orange for 500ms.
3)The Power LED turn green, with the other LEDs turned off.
During access to HDD Green Green -- -- --
Ready Green Off Off Off Off
Receiving job from the host (computer) Green --
Green
flashing
-- --
Waiting for job from the host (computer) Green -- Green -- --
Processing PS data (job) Green -- --
Green
flashing
--
Standby for process of PS data (job) Green -- -- Green --
Processing non-PS data (job) Green -- --
Orange
flashing
--
Standby for process of non-PS data (job) Green -- -- Orange --
Sending data to the printer
(Outputting job)
Green -- -- --
Green
flashing
Waiting to send data to the printer
(Waiting to output job)
Green -- -- -- Green
Error
PS Error Green -- -- Red --
Fatal Error 1
Unexpected error during operation.
Red Off Off Red Off
Fatal Error 2
Defect detected in self-test at start-up.
Red Off Red Off Off
Fatal Error 3
No operation of hardware
Red Off Off Off Off
--: Turning on or off according to jog progress.
How to Handle Errors
PS Error : It is a software error. Check the image data being processed.
Fatal Error 1 : Errors are supposed to arise from the operating environment or be caused by temporary
noise. Turn off the power and turn it on again, or check the operating environment.
Fatal Error 2 : Improper insertion of the Memory SIMM is suspected. Perform the DIAG program and
identify the problem.
Fatal Error 3 : If the DIAG program cannot be performed, replace a unit one by one to narrow down
to the cause of problem.