Canon PowrShot G5, Руководство по обслуживанию

Страница: 64 / 161

3-16
CHAPTER 3. REPAIR INSTRUCTION
Fig. 3-16 OPTICAL UNIT, FINDER UNIT
Coat it with the Dia bond 1663G
LED
HOLDER
(1)-6
OPTICAL UNIT
LED HOLDER
LED HOLDER
(1)-5
Flat-head
screwdriver
(1)-3
Claw
Dowel
(1)-1
(1)-2
(1)-7
(1)-4
(1)-6
(1)-6
(1)-6
FINDER UNIT
XA4-9170-359
BLACK
M1.7
(SELF TAP)
3.5mm
q
q
NOTE (Assembling)
2.2.13 OPTICAL UNIT, FINDER UNIT
(1) OPTICAL UNIT, FINDER UNIT
1. Remove the two screws of
q
.
2. Slant the FINDER UNIT in the direction of the arrow, and remove the dowel.
3. Remove the claw on the opposite side.
4. Turn over the FINDER UNIT in the direction of the arrow.
5. Push out the LED HOLDER with the use of flat-head screwdriver.
6. Turn over the FINDER UNIT again, pull out the LED HOLDER and remove the FINDER UNIT from the
OPTICAL UNIT.
7. Peel off the portion fixed by the Dia bond, and remove the LED HOLDER from the flexible board.
NOTE (Assembling)
Align the two dowels of the LED HOLDER with the position setting hole of the flexible board and coat it
with the Dia bond 1663G as shown in the figure.