manualshive.com logo in svg

Canon PowrShot G5, Руководство по обслуживанию, Страница: 2 / 161

Поделиться
Скачать
Canon PowrShot G5 Скачать руководство пользователя страница 2

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, and
repair of the products.

Corrections

This manual could include typographical errors or technical inaccuracies due to improvements or
changes in the products. When changes occur in applicable products or in the content of this manual,
Canon will release service 

information

 as the need arises. In the event of major changes in the

contents of this manual over a long or short period, Canon may issue new editions of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent
with local law.

Trademarks

The product names and company names described in this manual are the registered trademarks of
the individual companies.

Copyright

This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not
be copied, reproduced, published (including on the World Wide Web) or translated into another
language, in whole or in part, without the written consent of Canon Inc..

Copyright © 200

3

 by Canon Inc.

CANON INC.
Digital Imaging Products Service Dept.
30-2, Shimomaruko 3-Chome, Ohta-ku,
Tokyo 146-8501, Japan

Содержание PowrShot G5


































































































































































Отзывы:

Нет отзывов