Canon PowerShot SX620 HS, Руководство пользователя

Страница: 299 / 347

299
ç
Contents
Shots are out of focus.
● Press the shutter button halfway to focus on subjects before pressing it
all the way down to shoot ( = 48).
● Make sure subjects are within focusing range ( = 334).
● Set [AF-assist Beam] to [On] ( = 90).
● Confirm that unneeded functions such as macro are deactivated.
No AF frames are displayed and the camera does not focus when
the shutter button is pressed halfway.
● To have AF frames displayed and the camera focus correctly, try
composing the shot with higher-contrast subject areas centered before
you press the shutter button halfway. Otherwise, try pressing the shutter
button halfway repeatedly.
Subjects in shots look too dark.
● Raise the flash and set the flash mode to [ ] (
=
134).
● Adjust brightness by using exposure compensation (
=
117).
● Adjust contrast by using i-Contrast (
=
120,
=
176).
● Use spot metering (
=
118).
Subjects look too bright, highlights are washed-out.
● Lower the flash and set the flash mode to [ ] (
=
58).
● Adjust brightness by using exposure compensation (
=
117).
● Use spot metering (
=
118).
● Reduce the lighting on subjects.
Shots look too dark despite the flash firing (
=
65).
● Shoot within flash range (
=
330).
● Increase the ISO speed (
=
119).
Subjects in flash shots look too bright, highlights are washed-out.
● Shoot within flash range (
=
330).
● Lower the flash and set the flash mode to [ ] (
=
58).
White spots appear in flash shots.
● This is caused by light from the flash reflecting off dust or airborne
particles.