114
Before Use
Basic Guide
Advanced Guide
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
Connecting via NFC When Camera Is in Playback Mode
●
Press the [
] button to turn the camera
on.
●
Touch the N-Mark ( ) on the smartphone
112) with Camera Connect installed
against the camera’s N-Mark.
●
Press the [ ][ ][ ][ ] buttons to choose
an image to send, and then press the [ ]
button. [ ] is displayed.
●
To untag the image, press the [ ] button
again. [ ] is no longer displayed.
●
Repeat this process to choose additional
images.
●
After you finish choosing images, press
the [
] button.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●
Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
●
The images are sent.
●
If a message is displayed on the camera and requests you to
●
The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
●
You can preset images to transfer at your desired size (
●
When using NFC, keep the following points in mind.
-
Avoid strong impact between the camera and smartphone. This
may damage the devices.
-
Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions. If connection is not
established, keep the devices together until the camera screen
is updated.
-
If you try to connect while the camera is off, a message will be
displayed on your smartphone to ask you to turn the camera on.
Touch and try again after the camera is turned on.
-
Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
●
All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 3.
●
Once you have registered a smartphone, you can change privacy
settings for it on the camera (
●
Connections require that a memory card be in the camera.
●
You can change the nickname of the camera displayed on the
screen of step 2 (
●
Not all NFC-compatible smartphones have an N-Mark ( ). For
details, refer to the smartphone user manual.
●
You can also send multiple images at once and change the image
size before sending (
●
You can send the current image by choosing [Send this image] on
the screen in step 4.
●
To disable NFC connections, choose MENU (
29) > [ ] tab
> [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].