46
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Changing Movie Image Quality
Still Images
Movies
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see “Recording Time per Memory Card” (
●
Press the [
] button, choose [
] in the
menu, and choose the desired option
(
●
The option you configured is now
displayed.
●
To restore the original setting, repeat this
process but choose [
].
Image
Quality
Resolution
Frame Rate
Details
1920 x 1080
30 fps
For shooting in Full HD
1280 x 720
30 fps
For shooting in HD
640 x 480
30 fps
For shooting in standard
definition
●
In [
] and [
] modes, black bars displayed on the top and
bottom edges of the screen indicate image areas not recorded.
Red-Eye Correction
Still Images
Movies
Red-eye that occurs in flash photography can be automatically corrected
as follows.
1
Access the [Flash Settings] screen.
●
Press the [
] button, choose [Flash
Settings] on the [
] tab, and then press
the [
] button (
2
Configure the setting.
●
Choose [Red-Eye Corr.], and then
choose [On] (
●
Once the setting is complete, [
] is
displayed.
●
To restore the original setting, repeat this
process but choose [Off].
●
Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
●
You can also correct existing images (
●
You can also access the screen in step 2 when the flash is up by
pressing the [ ] button and immediately pressing the [
]
button.