Canon PowerShot SX160 IS, Руководство пользователя

Страница: 99 / 214

99
Flash
3
Shoot.
z z Even after the flash fires, ensure that
the main subject does not move until the
shutter sound is finished playing.
• Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. Additionally, you should set [IS
Mode] to [Off] when using a tripod or other means to hold the
camera still ( = 101).
• The setting screen cannot be accessed by pressing the < r >
button when the flash is lowered. Press the <
h
> button to raise
the flash, then configure the setting.
Still Images
Adjusting the Flash Exposure Compensation
Just as with regular exposure compensation (
=
81), you can adjust the
flash exposure from –2 to +2 stops, in 1/3-stop increments.
z z Press the < m > button, choose [ X ] in
the menu, and adjust the setting by either
pressing the < q >< r > buttons or turning
the <
5
> dial (
=
37).
X X
Once the setting is complete, [ X ] is
displayed.
•
When there is a risk of overexposure, the camera automatically adjusts the
shutter speed or aperture value during the flash shots to reduce washed-out
highlights and shoot at optimal exposure. However, you can deactivate automatic
adjustment of the shutter speed and aperture value by accessing < n >
(
=
38) and setting [Safety FE] in [Flash Settings] on the [
4
] tab to [Off].
• You can also configure the flash exposure compensation by accessing
<
n
> (
=
38) and choosing [Flash Exp. Comp] in [Flash Settings] on
the [ 4 ] tab.
•
You can also access the [Flash Settings] <
n
> screen when the flash
is up by pressing the < r > button and immediately pressing the < n >
button.
COP
Y