Canon Powershot SD940 IS, Руководство пользователя

Страница: 139 / 164

139
You can adjust the settings in the
1
tab by pressing the
1
button (p. 48).
Choosing the Image that First Displays
in Playback
●
Choose [Resume], then press the
qr
buttons
to choose an option.
In the
3
tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
●
Choose [Sound Options], then press the
m
button.
●
Press the
op
buttons to choose an option.
●
Press the
qr
buttons to choose a setting.
Changing the Start-up Screen
●
Choose [Start-up Image], then press the
m
button.
●
Press the
qr
buttons to choose a setting.
Changing Playback Functions
Last seen Resumes with the image last viewed.
Last shot
Resumes with the most recently shot
image.
Changing the Start-up Image or Sound
1 Preset sounds.
2
You can register your sounds using the supplied
software (p. 140).
No start-up image.
1 Preset images.
2 You can register your images.
EC277_CUG-E_CDP-E078.book Page 139 Thursday, May 21, 2009 8:16 PM
CO
PY