Canon Powershot SD40, Руководство пользователя

Страница: 53 / 154

Table of
Contents
Chapter 1
What is
ZoomBrowser EX?
Chapter 2
Downloading and
Printing Images
Chapter 3
What You Can Do with
a Camera Connected
Chapter 4
Viewing Images
Chapter 5
Organizing Images
Chapter 6
Using Supplementary
Features
Appendices Index
ZoomBrowser EX Software User Guide
53
Back Next
Operating the Camera Shutter from the Computer (3/4)
Other Remote Shooting Features
■
Interval Timer Shooting
Interval timer shooting is the method of capturing images in
which a set number of frames is recorded at set intervals of time.
Click the [Shooting] menu in the
remote shooting window and select
[Interval Timer Shooting]. Click [OK] in
the warning message to open the
window shown to the left. Set the
values and click [Start] to start shooting.
(Interval: between 5 seconds and 60
minutes; Frames: 2 or more)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
REFERENCE
• You may not be able to record at the set interval if it is too short
for the camera to transfer and save the image data.
■
Timer Shooting
Timer shooting is the method by which a single image is
recorded after a set number of seconds.
Click the [Shooting] menu in the
RemoteCapture Task window and select
[Timer Shooting] to open a window like
the one shown here. Set the number of
seconds for the delay and click [OK]. The
timer may be set to a range from 2
seconds to 30 seconds.
■
Saving and Recalling Shooting Settings
You can save the current zoom settings and the settings in the
“Field angle/flash” and “Shooting settings” tabs by clicking the
[File] menu in the RemoteCapture Task window and selecting
[Save Shooting Settings].
Later when you wish to recall those settings, click the [File]
menu in the RemoteCapture Task window and select [Batch
Shooting Settings].
■
Displaying the Subject on the Camera’s LCD Monitor
You can use the camera’s LCD monitor or a television
connected to the camera to view the subject while shooting
remotely.
Click the [Camera] menu in the
RemoteCapture Task window and select
[Camera Display Settings] to open a window
like the one shown here.
Select [Video Out terminal] or [Camera’s
LCD monitor] and click [OK].
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
REFERENCE
• See the user guides for your camera for information about
connecting the camera to a TV.