163
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Switching the Color of Screen Information
Still Images
Movies
Information displayed on the screen and menus can be changed to a color
suitable for shooting under low-light conditions. Enabling this setting is
useful in modes such as [ ] (
z
Choose [Night Display] on the [ 2] tab,
and then choose [On] (
z
To restore the original display, choose
[Off].
●
You can also return the setting to [Off] by holding down the
[
] button for at least one second.
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
1
Configure the setting.
z
Choose [Eco Mode] on the [ 2] tab, and
then choose [On].
z
[
] is now shown on the shooting
screen (
z
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
For greater calibration accuracy, display grid lines (
level the camera in advance.
1
Make sure the camera is level.
z
Place the camera on a flat surface, such
as a table.
2
Calibrate the electronic level.
z
Choose [Electronic level] on the [ 1] tab,
and then press the [ ] button.
z
Choose [Calibrate] and press the
[
] button. A confirmation message is
displayed.
z
Touch [OK].
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
z
Choose [Electronic level] on the [ 1] tab,
and then press the [ ] button.
z
Choose [Reset], and then press the [ ]
button.
z
Touch [OK].