88
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
●
You can also access the screen in step 1 by pressing the [
]
button.
●
You can also return the AF frame to the original position in the
center by holding down the [
] button.
●
You can also link the Spot AE Point frame to the AF frame
(
●
You can also configure the AF frame size by pressing the [
]
button and choosing [AF Frame Size] on the [
+Tracking
Still Images
Movies
●
Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
●
After you aim the camera at the subject, a white frame is displayed around
the person’s face determined by the camera to be the main subject, and
up to two gray frames are displayed around other detected faces.
●
When the camera detects movement, frames will follow moving
subjects, within a certain range.
●
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
●
When no faces are detected, or when only gray frames are displayed
(without a white frame), pressing the shutter button halfway will
display green frames in the areas in focus. Note that the maximum
number of frames depends on the aspect ratio (
●
If no faces are detected in Servo AF (
frame is displayed in the center of the screen when you press the
shutter button halfway.
●
Examples of faces that cannot be detected:
-
Subjects that are distant or extremely close
-
Subjects that are dark or light
-
Faces in profile, at an angle, or partly hidden
●
The camera may misinterpret non-human subjects as faces.
●
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Moving and Resizing AF Frames (1-point AF)
Still Images
Movies
When you want to change the position or size of the AF frame, set the AF
method to [1-point AF].
1
Move the AF frame.
z
Touch the screen. An AF frame is
displayed in orange where you touched
(Touch AF).
z
Turn the [ ] or [
] dial to move the
AF frame, and press the [
][ ][ ][ ]
buttons to fine-tune the position.
z
To return the AF frame to the original
position in the center, press the [
]
button.
2
Resize the AF frame.
z
To reduce the AF frame size, turn the
[
] ring. Turn it again to restore it to the
original size.
3
Finish the setup process.
z
Press the [ ] button.
●
AF frames are displayed at normal size when you use the digital
zoom (
