Canon PowerShot G2, Руководство по обслуживанию

Страница: 41 / 155

2-6
CHAPTER 2. TECHNICAL DESCRIPTION
Error Code
E23
E24
E25
E26
E27
E30
E50
E52
Name
CF NO SPACE
POWER ON
ERROR
FOCUS PI
ERROR
CAPTURE
TIME OUT
CF WRITE
TIME OVER
POWER OFF
ERROR
CF FORMAT
ERROR
QUICK REVIEW
ERROR
Occurrence Conditions
When the CF becomes full during writing
of photographed images to CF, writing is
repeatedly performed with the JPEG com-
pression ratio successively increased to re-
duce the size of the image file until it can
be successfully written to CF. This error
occurs when writing of the JPEG image file
fails after 10 retries at increasingly higher
compression ratios.
* The same applies in the case of the Mi-
cro Drive.
The power of the imaging circuit on the
MAIN PCB ASS’Y was not detected.
The power of the LCD PCB ASS’Y was not
detected.
Detection of the focus PI (photo-interrupter)
failed.
Writing of the photograph image to SDRAM
did not end within the specified time.
Free area could not be secured in the buffer
for the photograph image within the speci-
fied time in the continuous shooting mode.
The camera power was turned OFF while
the image was being recorded to the CF
Card/Micro Drive (while the green LED was
blinking). (The error code is displayed when
the camera is next turned ON.)
* This error may occur after E23.
The CF Card/Micro Drive could not be for-
matted properly.
Review of the photograph image failed.
Cause and Probable Faulty Part
MAIN PCB ASS’Y
MAIN PCB ASS’Y
DC/DC CONVERTER PCB ASS’Y
LCD PCB ASS’Y
HINGE UNIT
OPTICAL UNIT
MAIN PCB ASS’Y
MAIN PCB ASS’Y
CF CARD/MICRO DRIVE
MAIN PCB ASS’Y
The battery or DC plug was removed while
the image was being recorded to the CF
Card/Micro Drive.
→
Remedy: Restart the camera.
CF CARD/MICRO DRIVE
MAIN PCB ASS’Y