Changing the Color and Shooting
113
You can change the look of an image when shooting. However, depending on
shooting conditions the image may become coarse, or the colors may not
come out as expected.
Color Accent
You can choose to retain a single color and change the rest to black and white
in a composition.
Choose
T
.
●
Follow Steps 1 – 2 on p. 62 to choose
T
.
Press the
l
button.
X
The unchanged image and the Color
Accent image will alternately display.
●
The color for default settings is green.
Specify the color.
●
Position the center frame so it is filled with
the color you want and press the
q
button.
X
The specified color will be recorded.
Specify the range of colors.
●
Press the
op
buttons or turn the
Ê
dial
to change the range of colors to be
retained.
•
To change part of the pre-registered settings (except the shooting
mode), choose
or
and changes the settings, then repeat Steps
2–3. These settings will not be reflected in other Shooting modes.
•
To return contents registered to
or
to the default settings, turn
the mode dial to
or
, then choose [Reset All] (p. 51).
Changing the Color and Shooting
Recorded color
COP
Y
