111
In
D
mode, you can choose 3 levels of flash output.
Set the mode dial to
D
.
Choose the level of flash output.
●
After pressing the
r
button, immediately
turn the
÷
dial to choose the level of
output, then press the
m
button.
X
Once set,
~
will appear on the screen.
When the camera detects the possibility that people have their eyes shut,
appears.
Choose [Blink Detection].
●
Press the
n
button, then choose
[Blink Detection] in the
4
tab. Press the
qr
buttons to choose [On].
Shoot.
X
When a person with shut eyes is detected,
a frame and
appear.
Adjusting the Flash Output
You can also set the flash output with the following methods. However, it
cannot be set with the
r
button when an external flash (sold separately) is
attached. In this case, set the flash output using methods with an asterisk *.
•
After pressing the
m
button, press the
op
buttons to choose
~
, then press
the
qr
buttons or turn the
Ê
dial. *
•
Press the
n
button and choose [Flash Control] from the
4
tab. Then
choose [Flash Output] and press the
qr
buttons.*
•
Press the
r
button, then the
n
button, or press and hold the
r
button
for more than 1 second, and the setting screen will appear. Choose [Flash
Output], then press the
qr
buttons.
Checking for Shut Eyes
COP
Y
