Canon PowerShot G1 X Mark III, Руководство пользователя камеры

Страница: 43 / 231

43
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Customizing the Self-Timer
Still Images Movies
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [ ].
z
Following step 1 in “Using the Self-Timer”
(
=
42), choose [ ] and press the [ ]
button.
2
Configure the setting.
z
Press the [ ][ ] buttons to choose the
delay time or number of shots.
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose a value, and then press the
[ ] button twice.
z
Once the setting is complete, [ ] is
displayed.
z
Follow step 2 in “Using the Self-Timer”
(
=
42) to shoot.
● For movies recorded using the self-timer, recording begins after
your specified delay time, but specifying the number of shots has
no effect.
● When you specify multiple shots, image brightness and color tone
are determined by the first shot. More time is required between
shots when the flash fires or when you have specified to take
many shots. Shooting will stop automatically when the memory
card becomes full.
● When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)
2
Shoot.
z
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
z
For Movies: Press the movie button.
z
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
z
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
z
To cancel shooting after the self-timer
has been triggered, press the [ ]
button.
z
To restore the original setting, choose [ ]
in step 1.
Using the Self-Timer to Avoid Camera Shake
Still Images Movies
This option delays shutter release until about two seconds after you
have pressed the shutter button. If the camera is unsteady while you are
pressing the shutter button, it will not affect your shot.
z
Follow step 1 in “Using the Self-Timer”
(
=
42) and choose [ ].
z
Once the setting is complete, [ ] is
displayed.
z
Follow step 2 in “Using the Self-Timer”
(
=
42) to shoot.