159
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
4
Send an image.
z
Turn the [ ] dial to choose an image to
send, press the [ ][ ] buttons to choose
[Send this image], and then press the [ ]
button.
z
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
z
To end the connection, press the
[
] button, choose [OK] on the
confirmation screen (either press the
[ ][ ] buttons or turn the [ ] dial), and
then press the [ ] button.
●
Connections require that a memory card be in the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][
] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
(
31) > [ 4] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
●
You can also send multiple images at once and change the image
size before sending (
●
Once a connection destination is assigned in Touch Actions
(
127), you can automatically reconnect to a previous
destination simply by dragging across the screen with the
assigned gesture.
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send and receive images between
them as follows.
●
Only Wi-Fi compatible Canon cameras can be connected via Wi-Fi.
You cannot connect to a Canon camera unless it is Wi-Fi compatible,
even if it supports Eye-Fi cards.
1
Access the Wi-Fi menu.
z
Press the [ ] button.
2
Choose [ ].
z
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [ ], and then
press the [ ] button.
3
Choose [Add a Device].
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Add a Device], and then
press the [ ] button.
z
Also follow steps 1 – 3 on the target
camera.
z
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.