102
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Recording Movies at Specific Shutter
Speeds and Aperture Values
Still Images
Movies
Set your preferred shutter speed, exposure, aperture value, and ISO
speed.
For details on available shutter speeds, aperture values, and ISO speeds,
1
Enter [ ] mode.
z
Hold down the mode dial release button
and turn the mode dial to [ ].
z
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (
2
Configure the settings.
z
Turn the [
] dial to set the shutter
speed.
z
Turn the [ ] dial to set the aperture
value.
3
Shoot.
z
Press the movie button.
z
You can also adjust settings while
recording, as described in step 2.
●
Some shutter speeds may cause flickering on the screen when
recording under fluorescent or LED lighting, which may be
recorded.
Adjusting the Flash Output
Still Images
Movies
Choose from the three flash levels in [
][
][ ] modes.
1
Specify the flash mode.
z
Press the [
] button, choose [Flash
Control] on the [ 5] tab, and then press
the [ ] button (
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Flash Mode], and then
press the [ ] button.
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Manual], and then press
the [ ] button.
2
Configure the setting.
z
Raise the flash, press the [
] button and
immediately turn the [
] dial to choose
the flash level, and then press the [
]
button.
z
Once the setting is complete, the flash
output level is displayed.
[
]: Minimum, [
]: Medium, [
]:
Maximum
●
You can also set the flash level by accessing MENU (
and choosing [
5] tab > [Flash Control] > [Flash Output].
●
You can also access the [Flash Control] screen (
follows.
-
Press and hold the [ ] button for at least one second.
-
When the flash is up, press the [
] button and immediately
press the [
] button.