Canon PowerShot G1 X Mark III, Руководство пользователя камеры

Страница: 203 / 231

203
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Disconnected/Receiving failed/Sending failed
● You may be in an environment where Wi-Fi signals are obstructed.
● Avoid using the camera’s Wi-Fi function around microwave ovens and other
devices that operate on the 2.4 GHz band.
● Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
● Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
● If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Customer Support Help Desk.
Receiving failed
Insufficient space on card
● There is not enough free space on the memory card in the target camera to
receive images. Erase images to create space on the memory card, or insert a
memory card with sufficient space.
Receiving failed
Memory card locked
● The write-protect switch of the memory card in the camera to receive the images
is set to the locked position. Slide the write-protect switch to the unlocked
position.
Receiving failed
Naming error!
● When the highest folder number (999), and the highest image number (9999)
have been reached on the receiving camera, images cannot be received.
Insufficient space on server
● Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create
space.
● Use Image Transfer Utility to save the images sent by the Image Sync ( = 162)
server to your computer.
Check network settings
● Check to make sure your computer can connect to the Internet with the current
network settings.
A camera error was detected ( error number )
● If this error message is displayed immediately after a shot, the image may not
have been saved. Switch to Playback mode to check for the image.
● Frequent display of this error message may indicate damage. In this case, write
down the error number ( Exx ) and contact a Customer Support Help Desk.
File Error
● Correct printing (
=
191) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Print error
● Check the paper size setting (
=
193). If this error message is displayed when
the setting is correct, restart the printer and complete the setting on the camera
again.
Ink absorber full
● Contact a Customer Support Help Desk to request assistance with ink absorber
replacement.
Wi-Fi
Connection failed
● No access points were recognized. Check the access point settings ( = 150).
● A device could not be found. Turn the camera off and on again, and retry the
connection.
● Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
● The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
No access points found
● Check to make sure that the access point is turned on.
● When connecting to an access point manually, make sure that you entered the
correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
● Check the access point security settings (
=
150).
IP address conflict
● Reset the IP address so that it does not conflict with another.