Canon PowerShot ELPH 180, Руководство пользователя

Страница: 89 / 111

89
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images
Adding All Images to a Photobook
z z Following the procedure in “Choosing
a Selection Method” ( = 88 ), choose
[Select All Images] and press the [ ]
button.
z z Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Still Images
Removing All Images from a Photobook
z z Following the procedure in “Choosing
a Selection Method” (
=
88 ), choose
[Clear All Selections] and press the [ ]
button.
z z Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Still Images Movies
Using an Eye-Fi/FlashAir Card
Before using an Eye-Fi/FlashAir card, always confirm that local use is
permitted.
You can send images from the camera to Wi-Fi compatible smartphones,
tablets, or computers by inserting a FlashAir card in the camera. Inserting
a prepared Eye-Fi card enables automatic wireless transfer of images to a
computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi/FlashAir card. Refer to the card’s user
manual or contact the manufacturer for instructions on preparing and using
cards or resolving transfer problems.
• When using an Eye-Fi/FlashAir card, keep the following points in
mind.
- Cards may continue to emit radio waves even after [FlashAir] is
set to [Off] ( = 90 ) or [Eye-Fi trans.] is set to [Disable] ( = 91 ).
Remove the card before entering hospitals, aircraft, or other areas
where transmission is prohibited.
- When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
- Poor network connections may delay or interrupt image transfer.
- Cards may become hot, due to their transfer functions.
- Battery power will be consumed faster than in normal use.
- Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].