63
Sh
oot
ing
Setting the Camera to the Color Swap
Mode
This mode allows you to transform a color specified in the
LCD monitor into another.
1
(Color Swap)
.
See Menus and Settings (p. 22).
z
The camera will switch to color
input mode and the display will
alternate between the original
image and the color swap image
(using the previously set color).
2
Aim the camera so that the original
color appears at the center of the LCD
monitor and press the button.
z
Only one color can be specified.
z
You can use the
or
button to specify the range
of colors that are swapped.
Original Color
(Before Swapping)
Desired Color
(After Swapping)
–5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to
swap.
EC178_179CUG_Adv_Eng.book Page 63 Thursday, June 23, 2005 6:35 PM