61
Sh
oot
ing
Changing the Save Method for the
Original Image
When you are shooting still images in a My Colors mode, you
can specify whether or not both the altered image and the
original image are recorded.
1
(Rec.) Menu [Save Original] [On]/
[Off].
See Menus and Settings (p. 23).
z
If [On] is selected, the two
images will be numbered
consecutively with the altered
image following the original.
When [Save Original] is Set to [On]
- Only the altered image is shown in the LCD monitor
during shooting.
- The image that appears in the LCD monitor
immediately after recording is the altered image. If you
erase the image at this point, the original image is
erased along with the altered image.
Exercise adequate caution before deleting an image.
- Since two images are recorded with each shot, the
number of shots remaining is approximately half the
number displayed when this function is set to [Off].
EC178_179CUG_Adv_Eng.book Page 61 Thursday, June 23, 2005 6:35 PM