43
Sh
oot
ing
The aperture adjusts the amount of light entering through the lens.
When you set the aperture value, the camera automatically selects
a shutter speed to match the brightness.
Selecting a lower aperture value (opening the aperture) allows you
to blur the background and create a beautiful portrait. A higher
aperture value (closing it) brings the entire range from foreground to
background into focus. The larger the aperture value, the greater
the range of the image brought into clear focus.
Setting the Aperture
Shooting Mode
z
If the shutter speed is shown in red, the image is
underexposed (insufficient light) or overexposed (too much
light). Adjust the aperture value using the
or
button
until the shutter speed display turns to white.
z
Some aperture values may not be available with certain
zoom positions (p. 42).
In this mode, the shutter speed range with synchronized flash
is 1/60 second to 1/500 second. The aperture value setting
may therefore be changed automatically to match the
synchronized flash speed even if its value was set previously.
Aperture Value Display
z
The larger the aperture value, the smaller the lens aperture.
z
You can change the combinations of shutter speeds and
aperture values without altering the exposure (p. 50).
Safety Shift
When
and
modes, if [Safety Shift] is set to [On] in the Rec.
menu, the shutter speed or aperture value is automatically adjusted
for the correct exposure when it cannot be otherwise obtained. The
safety shift function does not work when the flash fires.
F2.8 F3.2 F3.5 F4.0 F4.1 F4.5 F5.0 F5.6 F6.3 F7.1 F8.0*
* In
, an aperture value of F11 at max. wide angle and of F16 at
max. telephoto may be possible depending on the shooting conditions.
EC178_179CUG_Adv_Eng.book Page 43 Thursday, June 23, 2005 6:35 PM
