35
Sh
oot
ing
You can set a 10 sec. (
) or 2 sec. (
) delay, or a custom delay
time and the number of shots (
Custom Timer), for shooting after
the shutter button is pressed.
To Cancel the Self-Timer
Follow procedure 1 to display
.
Using the Self-Timer
Shooting Mode
1
FUNC. Menu
* (Drive Mode)
/ / .
See Menus and Settings (p. 22).
* Default setting.
z
: 2 sec. before the shutter
releases, the self-timer sound and
lamp will speed up.
z
: The self-timer sound will play
when the shutter button is pressed and the shutter will
release 2 sec. later.
z
: You can change the delay time (0 – 10, 15, 20, 30 sec.)
and number of shots (1 – 10) (p. 36). However, these
settings cannot be set for
,
and
modes.
2
Shoot.
z
When the shutter button is pressed fully, the self-timer lamp
will blink. When using red-eye reduction, the self-timer lamp
will blink and then stay lit for the last 2 seconds.
You can change the self-timer sound (p. 27).
EC178_179CUG_Adv_Eng.book Page 35 Thursday, June 23, 2005 6:35 PM
